Watch Accessories for Sale:

Brass Case Opener Made in China: opens most modern water resistant watch cases with notches
Please click here to receive a quote or paste this text into an email to us!

Valuable Hint: always loosen a wrench BEFORE lifting it off a watch case back after having loosened the case back!

Why I think these watch accessories are interesting:
Because you will finally have access to the innards of your watches, to regulate them, or to just admire them, or to take movements shots, or ... there are no limits to the watch fun! All you need is the little initiative to order one and have a bit of courage and confidence. And I guarantee you, it will open a whole new watch world for you!

Details about these Watch Accessories

Price: Is firm, my margins are very small, no additional discounts sorry. See the Case Opener overview table for the price please.
Origin: Made in China
Watch Accessories Description and Condition: Please note, these case openers are Made in China an can not be compared to the USD 100 case openers from JAXA or Bergeon. They are made of solid brass and the steel bits are pretty hard too. As I said, you will not get a Bergeon quality opener, but a good amateur's tool for occasional opening of watch backs. We offer now the professional JAXA opener on PMWC.
Shipping, Packing and Refund Policy: Please click here for all the details. Please use the back button of your browser to come back to this page, thank you.

Dimensions of Brass Case Opener:
 Length: 13 cm or 5.2 inches
Width: 1.7 cm or 2/3 inches
Maximum width between bits: 32 mm or 1.28 inches
Weight: ca. 85 grams

Note on typical distances of notches on case backs
As an example, the 36 mm Sandoz Explorer-like or a 40 mm Sandoz Submariner-like use a distance of 29 mm or 1.41 inches, so this opener will fit. You will have no problem opening 40 mm plus watches.


As a sample of a screwed case back that this opener will be able to unscrew. The Sandoz 40 mm Diver in this picture, has a distance of 29 mm between two opposite notches on the case back. So this openers will be able to handle even watches with diameters of plus 40 mm. If you have doubts measure the distance of the notches and compare with the maximum opening distance between the bits, 32 mm