Slipstream Quartz Chronograph, Swiss Caliber, 1st Edition, April 2005


The picture illustrates the crown positions 0, 1 and 2 and shows the resetting of the center chronograph second hand

Resetting the central chronograph hand and the 1/10th second hand on a ETA G10
Fairly simple procedure, yet good to know:
1) Unscrew the crown from the locked position and then pull it out one step to Position 1 (also called the date setting position)
2) One push at the pusher at 4 o'clock advances the center chronograph hand one second or one tick
3) One push at the pusher at 2 o'clock advances the 1/10th second sub dial at 2 o'clock one third of a tick

Resetting the minute counter sub dial at 10 o'clock
1) Pull the crown one more position to Position 2 (also called the time setting position)
2) Turning the crown will change the main hour and minute hands
3) One push at the pusher at 2 o'clock will advance the minute counter at 10 o'clock half a tick